WaterMe- Wireless Irrigation controller & Orbit Pump Start Relay 2HP – 1 phase

5.00 out of 5 based on 1 customer rating
(1 customer review)
5.00 out of 5

$370.00 $325.00 Inc. GST

Free Shipping Australia Wide
Express Postage option available at checkout
Free Shipping Australia Wide
Express Postage option available at checkout


– Remote access via mobile app or computer (internet connection required)

– 10 independent schedules

– Permanent program memory

– Photo Capture to identify Zones

– Push notification sent to smart phone in case of leak or flow rate out of specification

– Programmable master valve delay time

– Programmable mist cycle

– Included flow sensor 1″ BSP (measuring range 2-100 LPM)

– Local weather synchronization automatically alters watering schedules

Input Capabilities

– 1 x Master Valve

– 10 x Solenoid Valves

– 3 x Flow Sensor (1 Included)

– Rain Sensor

– Moisture Sensor

-Apple and Android mobile platform capable

Electrical Specification

Transformer input 24VAC, 50 Hz

Transformer output 24VDC 1.5 Ams

Maximum valve current 24VAC at 1.0 AMP


– 24VAC/DC valves (Max current draw 1000mA/Valve)

– Controller provides full current on valve start up then reverts to low current on run, saving up to 70% power

– DC latching valve compatible 6-12v DC

– Weather resistant material

– Apple and Android operating platform capable

– Simple setup, operation and programming experience

– Australian Designed and Engineered

1″ Flow Sensor:

1″ BSP Male Thread Inlet + 1″ BSP Male Thread Outlet

Flow Range: 2 – 100 LPM
Repeatability <= 1%
Accuracy <=2.5% of FULL SCALE
Max. fluid temperature: 60 DEG C
Max. Ambient Temp. Range: 0 DEG C – +60 DEG C
Max. Fluid Pressure: 1.5 Mpa
Operating Voltage: +5V – + 24V
Output Frequency: Square Wave


Body: 30% Glass Filled Nylon
Support Spindle: 316 Stainless Steel
Paddle Wheel: Acetal (POM)
Oring: Nitrile
Screws: 304 Stainless Steel

Orbit Pump Start Relay 2HP

Used for starting pump unit from 24VAC output Irrigation controller
  • Automatically starts pump from output of controller
  • Lockable weather resistant case
  • Covered wiring compartment for protection
Technical Specs:
  • Contact rating 2HP (1.5kw) at 240 volt
  • 1 Phase, coil rating, 24VAC, 3VA
  • Double pole, single throw 20 amp
The Input will be connected with Master and second wire to the common.
Weight 2 kg



No products in the cart.

No products in the cart.