QUALITY IRRIGATION PRODUCTS : AUSTRALIAN COMPANY, SHIPS WORLDWIDE

WaterMe Combo – WiFi Controller & 10 Zone 19mm Barb Irrigation Manifold Valves with 13 core Wire

$525.00 $472.00 Inc. GST

Package Includes:

Qty 1 x WaterMe Irrigation Controller (1″ Flow Sensor Included)
Qty 10 x 3/4″ Irrigation Solenoid Manifold Valve ( 2-way) – 50LPM
Qty 2 x 3/4″ Brass Endcap
Qty 1 x Pink Plumbing Tape ( High Density)
13 core Irrigation wire – 25 meter length

Free Shipping Australia Wide
Express Postage option available at checkout
Wireless Controller Features:

– Remote access via mobile app or computer (internet connection required)

– 10 independent schedules

– Permanent program memory

– Photo Capture to identify Zones

– Push notification sent to smart phone in case of leak or flow rate out of specification

– Programmable master valve delay time

– Programmable mist cycle

– Included flow sensor 1″ BSP (measuring range 2-100 LPM)

– Local weather synchronization automatically alters watering schedules

Input Capabilities

– 1 x Master Valve

– 10 x Solenoid Valves

– 3 x Flow Sensor (1 Included)

– Rain Sensor

– Moisture Sensor

-Apple and Android mobile platform capable

Electrical Specification

– Transformer input 24VAC, 50 Hz

– Transformer output 24VDC 1.5 Ams

– Maximum valve current 24VAC at 1.0 AMP

Functional

– 24VAC/DC valves (Max current draw 1000mA/Valve)

– Controller provides full current on valve start up then reverts to low current on run, saving up to 70% power

– DC latching valve compatible 6-12v DC

– Weather resistant material

– Apple and Android operating platform capable

– Simple setup, operation and programming experience

– Australian Designed and Engineered

1″ Flow Sensor:

– 1″ BSP Male Thread Inlet + 1″ BSP Male Thread Outlet

– Flow Range: 2 – 100 LPM

– Repeatability <= 1%

– Accuracy <=2.5% of FULL SCALE

– Max. fluid temperature: 60 DEG C

– Max. Ambient Temp. Range: 0 DEG C – +60 DEG C

– Max. Fluid Pressure: 1.5 Mpa

– Operating Voltage: +5V – + 24V

– Output Frequency: Square Wave

Material:

– Body: 30% Glass Filled Nylon

– Support Spindle: 316 Stainless Steel

– Paddle Wheel: Acetal (POM)

– Oring: Nitrile

– Screws: 304 Stainless Steel

3/4″- 24 VAC Irrigation Solenoid (2-Way) – Australia Made & Watermark Approved

– Inlet – 3/4″ BSP Male Thread

– Outlet 1 – 3/4″ BSP Female Manifold

– Outlet 2 – 19 mm Barb

– Flow – 50 LPM

– Voltage – 24VAC

– Solenoids joins together to form a neat assembly which takes less space overall

Material:

– Body – 30% Glass Filled Nylon – UV Stabilised

– Internal Diaphragm – Nitrile

– Internal Disk – Acetal

Irrigation Wire – 13 core – 0.5sqmm

Total Length – 25 meter

Flexible PVC Sheath

Low Voltage

Can use for wiring Solenoid Valves, Irrigation Controllers, Flowmeters, Timers etc.

Total Item package:

– 1 x Wirless Irrigation Controller( Flow Sensor Included)

– Qty. 10 x 3/4″ Irrigation Solenoid – 50LPM ( 2-way)

– 13 core Irrigation wire – 25 meter length x 0.5sqmm

– Qty. 2 x 3/4″ BSP Male Brass Endcaps

Weight 7 kg
Condition

New

Availability

Usually Ships within 1 Business Day

Warranty Information

1) The product carry a standard 1 year warranty from the date of purchase.
2) Our obligation under warranty is to repair or replace the product or refund the price paid excluding shipping charges.
3) The warranty doesn't cover any physical or electrical damage to product mainly due to improper installation, product misuse and wrong wiring connections.
4) The customer need to make sure that installation of product is as per manufacturer instructions. The product warranty will stand void in case the installation is not as per the manufacturer guidelines.

1. Please check the voltage at terminal/leaded end of the solenoid with help of multimeter and check whether the output voltage is as per the rated coil voltage. If the voltage reading is faulty, the coil may have been turned to open circuit. If the reading is correct, proceed to the below stated steps.
2. Check the wire connection and/or the terminals to check the wire integrity.
3. Open the solenoid valve and clean any debris or external matter present in solenoid that might be obstructing the proper shutting of the solenoid.
4. Check the plunger to ensure that nothing is obstructing its movement.
5. Check whether diaphragm is seated properly in its place and there is no tear in it.
6. Make sure that the spring is retained in its place while checking the plunger movement.
7. Close the solenoid and check its working again.
8.If the solenoid still doesn’t work contact the manufacturer for a replacement.

Navigation

MY CART

Close

No products in the cart.

No products in the cart.