The WaterMe Combo Includes:

WaterMe – Wireless Irrigation Controller
Qty. 8x Solenoid Valve 1″ BSP (Barrel Union Assembly) Inlet – 1″ BSP out (Female) 100LPM
Qty. 1x Inline Master Solenoid Valve 1″ BSP (Female) – 1″ BSP (Female) out 24VAC 100LPM
Qty. 2x Elbow Swivels with O-ring to suit

Condition: New

WaterMe – Wireless Irrigation Controller


Remote access via mobile app or computer (internet connection required)
10 independent schedules
Permanent program memory
Photo Capture to identify Zones
Push notification sent to smart phone in case of leak or flow rate out of specification
Programmable master valve delay time
Programmable mist cycle


24VAC/DC valves (Max current draw 1000mA/Valve)
Controller provides full current on valve start up then reverts to low current on run
DC latching valve compatible 6-12v DC
Weather resistant material
Apple and Android operating platform capable
Simple setup, operation and programming experience
Australian Designed and Engineered

Input Capabilities

1 x Master Valve
3 x Flow Sensor (1 Included)
10 x Solenoid Valves
1 x Rain Sensor
1 x Moisture Sensor

Electrical Specification

Transformer input 24VAC, 50 Hz
Transformer output 24VDC 1.5 Ams
Maximum valve current 24VAC at 1.0 AMP
24VAC/DC valves (Max current draw 1000mA/Valve)

Irrigation Solenoid Valve 24VAC – 100LPM

Technical Specification

Operating Pressure Range – 20Kpa to 1250Kpa
Power Consumption – 8VA
Frequency – 50Hz
Flow – 100LPM
Voltage – 24VAC
Lead Length – 200mm
Valve Type – Normally Closed
Temperature Range – 2°C – 60°C (Ambient), 2°C – 80°C (Media)


Body – 30%Glass Filled Nylon
Coil Encapsulation – 30%Glass Filled Nylon
Diaphragm – Natural Nitrile Elastomer
Disk Diaphragm – Acetal
Filter – Acetal
Application Area – Liquid, Gas & Light Oil
Made in Australia
WaterMark Approved and Compliant with ATS 5200.030

Weight4.8 kg



Usually Ships within 1 Business Day

Warranty Information

1) The product carry a standard 1 year warranty from the date of purchase.
2) Our obligation under warranty is to repair or replace the product or refund the price paid excluding shipping charges.
3) The warranty doesn't cover any physical or electrical damage to product mainly due to improper installation, product misuse and wrong wiring connections.
4) The customer need to make sure that installation of product is as per manufacturer instructions. The product warranty will stand void in case the installation is not as per the manufacturer guidelines.

1. Please check the voltage at terminal/leaded end of the solenoid with help of multimeter and check whether the output voltage is as per the rated coil voltage. If the voltage reading is faulty, the coil may have been turned to open circuit. If the reading is correct, proceed to the below stated steps.
2. Check the wire connection and/or the terminals to check the wire integrity.
3. Open the solenoid valve and clean any debris or external matter present in solenoid that might be obstructing the proper shutting of the solenoid.
4. Check the plunger to ensure that nothing is obstructing its movement.
5. Check whether diaphragm is seated properly in its place and there is no tear in it.
6. Make sure that the spring is retained in its place while checking the plunger movement.
7. Close the solenoid and check its working again.
8.If the solenoid still doesn’t work contact the manufacturer for a replacement.




No products in the cart.

No products in the cart.