QUALITY IRRIGATION PRODUCTS : AUSTRALIAN COMPANY, SHIPS WORLDWIDE

Pressure Reduction Valve 20 mm Straight Through

$45.00 $26.00 Inc. GST

SKU: PRV M20M20Categories: ,
Shipping Estimate

Pressure Reduction Valve 3/4″

Features

Compact and Robust Design
Easily Adjustable 100kPa – 600kPa
Straight Through or 90° Angle Installation Configuration
Fully Serviceable Inbuilt Strainer
Replaceable Internal Assembly
Easy Maintenance and Cleaning
Silent Operation

Technical Specification

Pressure Range : 100 – 600kPa
Factory Set: 500kPa
Maximum Inlet Pressure: 1400kPa
Maximum Temperature: 60°C
Media: Water / Air
Inlet/Outlet Size: 3/4” BSP Male
Model Number: PRV M20M20

Material

Body – 30%Glass Filled Nylon
Internal Seals : Nitrile
Spring : Stainless Steel 304
Diaphragm : Reinforced Nitrile
Internal Cartridge : Acetal
Filter : Stainless Steel 304
External Screws: Stainless Steel 304

WARRANTY INFORMATION

1) The product carry a standard 1 year warranty from the date of purchase.
2) Our obligation under warranty is to repair or replace the product or refund the price paid excluding shipping charges. 3) The warranty doesn’t cover any physical or electrical damage to product mainly due to improper installation, product misuse and wrong wiring connections.
4) The customer need to make sure that installation of product is as per manufacturer instructions. The product warranty will stand void in case the installation is not as per the manufacturer guidelines.

Weight0.25 kg
Condition

New

Availability

Usually Ships within 1 Business Day

Warranty Information

1) The product carry a standard 1 year warranty from the date of purchase.
2) Our obligation under warranty is to repair or replace the product or refund the price paid excluding shipping charges.
3) The warranty doesn't cover any physical or electrical damage to product mainly due to improper installation, product misuse and wrong wiring connections.
4) The customer need to make sure that installation of product is as per manufacturer instructions. The product warranty will stand void in case the installation is not as per the manufacturer guidelines.

1. Please check the voltage at terminal/leaded end of the solenoid with help of multimeter and check whether the output voltage is as per the rated coil voltage. If the voltage reading is faulty, the coil may have been turned to open circuit. If the reading is correct, proceed to the below stated steps.
2. Check the wire connection and/or the terminals to check the wire integrity.
3. Open the solenoid valve and clean any debris or external matter present in solenoid that might be obstructing the proper shutting of the solenoid.
4. Check the plunger to ensure that nothing is obstructing its movement.
5. Check whether diaphragm is seated properly in its place and there is no tear in it.
6. Make sure that the spring is retained in its place while checking the plunger movement.
7. Close the solenoid and check its working again.
8.If the solenoid still doesn’t work contact the manufacturer for a replacement.

Navigation

MY CART

Close

No products in the cart.

No products in the cart.