Orbit B-Hyve 6 Station WiFi Irrigation Combo -Qty 5 x 1″ Solenoids & Rain Sensor

$475.00 $399.00 Inc. GST

Free Shipping Australia Wide
Express Postage option available at checkout
SKU: Orbit5ComboCategories: ,
Shipping Estimate

Orbit B-Hyve 6 Station WiFi Irrigation Controller – Ideal for Outdoor Use +  Rain sensor + Qty 5 x 1 inch Solenoids

Combo Includes:
  • Orbit B-Hyve WiFi Irrigation Controller ( Outdoor use enclosure)
  • Rain Sensor
  • Qty 5 x 1 inch Solenoid with Flow Control & Manual Override (Including Master Solenoid)
  • Qty 10 x Scotchlok 3M Gel Filled Connectors
  • Qty 1 x 10m Pink Plumbing tape
  • Qty 1 x 1 inch Endcap
  • Qty 1 x 1 inch M/F Adapter

The Orbit B-Hyve Wi-Fi sprinkler timer allows the user to water smarter and make watering decisions based on the needs of the home garden. Orbit B-Hyve controller combines easy programming and remote programming using the home Wi-Fi. Users can remotely access and programm their controller from their IOS (Apple) or Android mobile application at no charge.Programming can also be carried out at the controller allowing dual functionality.Orbit B-Hyve can be set to adjust watering based on local weather using your postcode making sure you minimise water waste due to rain and delivering the correct water volumes to your lawn and plants.

  • 6 Stations/Zones
  • Large LCD Display
  • Weatherproof Case
  • Can connect Rain sensor & Pump Start Relay
  • Smart WeatherSenseTM Technology
  • 3 programs
  • 4 start times per program
  • 1 – 240 minute run time per station
  • Selective days to water or Odd/Even and interval selection upto 32 days
  • Seasonal adjustment 10% – 200% per program
  • Rain delay 1 – 32 days
  • Will operate with or without Wi-Fi connectivity
  • Indoor / Outdoor lockable cabinet
  • Built in fault detection and surge protection
  • Swing panel for easy access to wiring terminal
  • Knock-outs for 13, 20 and 25mm conduit for station wires
  • Intergrated catch-cup application allows up to 50% water savings
  • Watering history reports
  • Program stored in non-volatile memory and is not lost if timer loses power
  • Up to 5 users allowed for remote access – ideal for maintenance and outside programming
  • Controller smart watering setting, acts as rain delay based on forecast with standard controller station programming 
  • Smart watering by station, allows user to set irrigation condition for each station plant type 
  • Wi-Fi functional Android, IOS mobile platform > no charge 
  • Programmable from mobile application or at the timer 
  • WeatherSenseTM technology that provides smart watering based on site conditions such as slope, soil type, sun/shade, historical ET and live weather feeds 
  • Smart watering restrictions based on odd/even or selective days
• Transformer input : 240vac > 50Hz 
• Transformer Output : 24vac @ 1.0A 
• Station output : Upto 0.80A each 
• Pump / Master Valve Outputs : 1 pump/master valve, 2 valves from 1 station 
• Sensor inputs : 1 dry contact open type (prevents watering) 
• IP ratings : IP33 
• Battery: CR2032 3 volt DC, holds time and date 
  • 5m wire length
  • 5 level adjustable rain setting ( inch & mm)
  • No battery Needed
  • Shuts down watering once rain is detected
  • Easy mounting
1 inch Solenoid with Flow Control & Manual Override

Inlet – 1″ BSP Female thread (AS 1722)
Outlet – 1″ BSP Female thread (AS 1722)

Technical Specification

Operating Pressure Range – 20Kpa to 1250Kpa
Power Consumption – 8VA
Frequency – 50Hz
Flow – 100LPM
Voltage – 24VAC
Lead Length – 200mm
Valve Type – Normally Closed
Temperature Range – 2°C – 60°C (Ambient), 2°C – 80°C (Media)


Body – 30%Glass Filled Nylon
Coil Encapsulation – 30%Glass Filled Nylon
Diaphragm – Natural Nitrile Elastomer
Disk Diaphragm – Acetal
Filter – Acetal
Application Area – Liquid, Gas & Light Oil
Made in Australia
WaterMark Approved and Compliant with ATS 5200.030


Weight4 kg



No products in the cart.

No products in the cart.