OEM BONAIRE SOLENOID VALVE 24Vac 1/2″ WITH 6mm Bleed Fitting – TO SUIT PART# 6051636SP

Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)
5.00 out of 5

$45.00 $30.00 Inc. GST

Free Shipping Australia Wide
Express Postage option available at checkout

OEM BONAIRE SOLENOID VALVE 24Vac 1/2 WITH 6mm Bleed Fitting – TO SUIT PART# 6051636SP

Assembly Includes:

OEM BONAIRE SOLENOID VALVE 24Vac 1/2 WITH 6mm Bleed Fitting – TO SUIT PART# 6051636SP
Inlet – 1/2″ BSP thread Male (AS 1722)
Outlet – 1/2″ BSP thread Female (AS 1722)

Technical Specification

Operating Pressure Range – 20Kpa to 1250Kpa
Power Consumption – 8VA
Frequency – 50Hz
Flow – 20LPM
Voltage – 24VAC//240VAC
Valve Type – Normally Closed
Lead Length – 200mm
Temperature Range – 2°C – 60°C (Ambient), 2°C – 80°C (Media)


Body – 30%Glass Filled Nylon
Coil Encapsulation – 30%Glass Filled Nylon
Diaphragm – Natural Nitrile Elastomer
Disk Diaphragm – Acetal
Filter – Acetal
Application Area – Liquid, Gas & Light Oil
Made in Australia
WaterMark Approved and Compliant with ATS 5200.030


Weight0.2 kg



Usually Ships within 1 Business Day

Warranty Information

1) The product carry a standard 1 year warranty from the date of purchase.
2) Our obligation under warranty is to repair or replace the product or refund the price paid excluding shipping charges.
3) The warranty doesn't cover any physical or electrical damage to product mainly due to improper installation, product misuse and wrong wiring connections.
4) The customer need to make sure that installation of product is as per manufacturer instructions. The product warranty will stand void in case the installation is not as per the manufacturer guidelines.

1. Please check the voltage at terminal/leaded end of the solenoid with help of multimeter and check whether the output voltage is as per the rated coil voltage. If the voltage reading is faulty, the coil may have been turned to open circuit. If the reading is correct, proceed to the below stated steps.
2. Check the wire connection and/or the terminals to check the wire integrity.
3. Open the solenoid valve and clean any debris or external matter present in solenoid that might be obstructing the proper shutting of the solenoid.
4. Check the plunger to ensure that nothing is obstructing its movement.
5. Check whether diaphragm is seated properly in its place and there is no tear in it.
6. Make sure that the spring is retained in its place while checking the plunger movement.
7. Close the solenoid and check its working again.
8.If the solenoid still doesn’t work contact the manufacturer for a replacement.




No products in the cart.

No products in the cart.